How to Replace Nissan Versa Cabin Air Filter

I owned an 07 Nissan Versa. A while back while doing regular service, the dealer told me my cabin air filter needs changing and its cost a whopping $90+ dollars. I decided that I would see if I can do it myself. There are some information online on how to do it, but picture are few. So I thought I might give my version to see if it helps someone down the line.
Difficulty: Moderately Easy
Instructions
Things You'll Need
Cabin Air filter for Nissan Versa 07
1

The filter is placed behind the glove compartment. To remove the compartment, you need to take out the 8 screws holding the glove compartment in place
2

top 4 screws

The top 4 screws can be found after you open the glove compartment.
3

bottom 4 screws

The bottom 4 screws is at the bottom of the glove compartment. Close the compartment for better access
4

cable connection to light bulb

Pull out the compartment slowly and you will see the cable connecting the light bulb to the compartment. Twist the connector to remove it before removing the compartment completely
5

compartment space

Compartment space. The filter is location at the left bottom corner of the space as shown in the picture. Its far in the space literally against the wall of the space.
6

filter

Filter from outside. This is what you are looking for. You can also look at the replacement part to figure out what you should be looking for.
7


Removing the filter is the tricky part. If you look at the replacement part you notice the tab on top has a catch and an extension at the bottom which is hooked up. To remove the filer the top tab has to be pressed inward, pull the filter out and up to remove the bottom extension from its catch.
8


After you remove the filter, put in the replacement part. Take care to make sure the top loose filter is not caught by pressing it down slightly as you push it in
9

Place the bottom extension into its catch and click the top tab into place. Put the glove compartment into the space and connect back the light fixture. Put in the 8 screws and you are done.

Tips & Warnings

You might have to use a screwdriver to pry out the filter.

You might need to get creative to get into the compartment space to see or remove the filter. If you are not comfortable or find it difficult to remove the filter, go to a mechanic.